Agitated Thin Flim Dryer - ATFD
- Introduction:
Welcome to the world of Agitated Thin Film Dryer (ATFD) and other heat transfer equipment. Ketav Consultant leads by virtue of superior engineering design capabilities, manufacturing excellence and a project based approach committed to to deliver high performance total evaporation solution customized to our client requirement.
Ketav Consultant offer ATFD as a single point solution for all kind of drying application. Our ATFD’s are running smoothly production and effluent purpose in chemical Pharma, Textile, Food and Beverages Industries.
- Operating Principle:
ATFD is stands for evaporation of water/solvents to make concentrated liquid to dry power or flakes. Based on application either recover solvent or dry product in important.
ATFD is the ideal apparatus for continuous processing of concentrated material to dry solids. ATFD is consist of cylindrical, vertical body with heating jacket and a rotor inside of the shell which is equipped with rows and pendulum blades all over the length of the dryer. The hinged blades spread the wet feed product in a thin flim over the heated wall.
The turbulence increase as the product passes through the clearance before entering calming zone situated behind the blades as the heat will transfer from jacket to main shell the under the smooth agitation water/solvent will evaporate and liquid will convert to slurry, to cake or to dry power or flex.
The vapors produced rise upward, counter- currently to the liquid and pass through Cyclone separator mounted of vapor outlet of ATFD.
Further these vapor will be condensed in condenser and recovered as condensate. System will be Operated under vacuum for temperature sensitive products and atmospheric condition for normal drying.
Agitated Thin Film Dryer ATFD
Minimum Order Quantity: 1 Piece
Product Brochure
Capacity | 3 Sq/m |
Application | Pharma Industry, Textile Industry |
Max Temperature | 200 Degree |
Automatic Grade | Automatic |
Frequency | 50-60 Hz |
Voltage | 415V |
Powder form | 10-15% moisture |
We are leading manufacturer, Importers and Service Provider of Agitated Thin Film Dryer ATFD and our product is made up of good quality.
The outlet of ATFD will be in the Powder form having 10-15% moisture.
This system will evaporate the solution by a thin layer formed on the Surface.
ATFD is standing for evaporation of water/solvents to make a concentrated liquid to dry powder or flakes.
Based on application either recover solvent or dry product in important.
ATFD is the ideal apparatus for continuous processing of concentrated material to dry solids.
ATFD is consist of cylindrical, vertical body with heating jacket and a rotor inside of the shell which is equipped with rows and pendulum blades all over the length of the dryer.
The hinged blades spread the wet feed product in a thin film over the heated wall.
The turbulence increase as the product passes through the clearance before entering calming zone situated behind the blades as the heat will transfer from jacket to main shell the under the smooth agitation water/solvent will evaporate and liquid will convert to the slurry, to cake or too dry power or flex.
The vapors produced rise upward, counter- currently to the liquid and pass through Cyclone separator mounted of vapor outlet of ATFD.
Further these vapors will be condensed in the condenser and recovered as condensate. The system will be Operated under vacuum for temperature sensitive products and atmospheric condition for normal drying.
- Pharma Industry: Drying of products for API and its intermediates to eliminate the conventional process of drying.
- Recovery of important solvent from the feed.
- Textile Industry: Drying of concentrated liquid for salt recovery to eliminate crystallizer and filtration system.
- Agro Chemicals Dyers and pigments Industry: Drying of products for recovery of an organic product, to eliminate other conventional systems.
- Chemical and Petro Chemical Industry: Drying of chemical and petro chemical products to recover the powder of cakes.
- Sugar Industry and Distilleries: Drying of concentrated effluent to make zero liquid Discharge System.
- Treatment Plants: One stop solution for drying of effluent to make zero liquid discharge.
Additional Information:
- Port of Dispatch: By Road
- Production Capacity: 3 SqM
- Delivery Time: 15 days
- Packaging Details: As per applicable at the time of dispatch
ATFD (Agitated Thin Film Dryer)
Product Brochure
Capacity | 375 Kg/Hr |
Max Temperature | 120 Deg C |
Automatic Grade | Automatic |
Voltage | 240 - 320V |
Driven Type | Electric |
Moisture | 10 - 15% |
We are leading manufacturer of ATFD (Agitated Thin Film Dryer) and our product is made up of good quality.
- Agitated Thin Film Dryer is used to dry a solution of high TDS Water or Products. The outlet of ATFD will be in the Powder form having 10-15% moisture.
- This system will evaporate the solution by a thin layer formed on the Surface.
- ATFD is standing for evaporation of water/solvents to make a concentrated liquid to dry powder or flakes.
- Based on application either recover solvent or dry product in important. ATFD is the ideal apparatus for continuous processing of concentrated material to dry solids.
- ATFD is consist of cylindrical, vertical body with heating jacket and a rotor inside of the shell which is equipped with rows and pendulum blades all over the length of the dryer.
- The hinged blades spread the wet feed product in a thin film over the heated wall.
- The turbulence increase as the product passes through the clearance before entering calming zone situated behind the blades as the heat will transfer from jacket to main shell the under the smooth agitation water/solvent will evaporate and liquid will convert to the slurry, to cake or too dry power or flex.
- The vapors produced rise upward, counter- currently to the liquid and pass through Cyclone separator mounted of vapor outlet of ATFD.
- Further this vapor will be condensed in the condenser and recovered as condensate.
- System will be Operated under vacuum for temperature sensitive products and atmospheric condition for normal drying.
Application:
- Pharma Industry: Drying of products for API and its intermediates to eliminate the conventional process of drying.
- Recovery of important solvent from the feed.
- Textile Industry: Drying of concentrated liquid for salt recovery to eliminate crystallizer and filtration system.
- Agro Chemicals Dyers and pigments Industry: Drying of products for recovery of an organic product, to eliminate another conventional system.
- Chemical and Petro Chemical Industry: Drying of chemical and petro chemical products to recover the powder of cakes.
- Sugar Industry and Distilleries: Drying of concentrated effluent to make zero liquid Discharge System.
- Treatment Plants: One stop solution for drying of effluent to make zero liquid discharge.
Additional Information:
- Port of Dispatch: By Road
- Production Capacity: 3 SqM
- Delivery Time: 15 days
- Packaging Details: As per applicable at the time of dispatch
Agitated Thin Film Dryer
Minimum Order Quantity: 1 Piece
Product Brochure
Capacity | 50 kg/hr to 2000 kg/hr |
Max Temperature | 120 degree celsius |
Automation Grade | Semi-Automatic |
Material | SS 316 L & Duplex 2205 |
Automatic Grade | Semi-Automatic |
Design | Customized |
Phase | 3 phase |
- Introduction:
Welcome to the world of Agitated Thin Film Dryer (ATFD) and other heat transfer equipment. Ketav Consultant leads by virtue of superior engineering design capabilities, manufacturing excellence and a project based approach committed to to deliver high performance total evaporation solution customized to our client requirement.
Ketav Consultant offer ATFD as a single point solution for all kind of drying application. Our ATFD’s are running smoothly production and effluent purpose in chemical Pharma, Textile, Food and Beverages Industries.
- Operating Principle:
ATFD is stands for evaporation of water/solvents to make concentrated liquid to dry power or flakes. Based on application either recover solvent or dry product in important.
ATFD is the ideal apparatus for continuous processing of concentrated material to dry solids. ATFD is consist of cylindrical, vertical body with heating jacket and a rotor inside of the shell which is equipped with rows and pendulum blades all over the length of the dryer. The hinged blades spread the wet feed product in a thin flim over the heated wall.
The turbulence increase as the product passes through the clearance before entering calming zone situated behind the blades as the heat will transfer from jacket to main shell the under the smooth agitation water/solvent will evaporate and liquid will convert to slurry, to cake or to dry power or flex.
The vapors produced rise upward, counter- currently to the liquid and pass through Cyclone separator mounted of vapor outlet of ATFD.
Further these vapor will be condensed in condenser and recovered as condensate. System will be Operated under vacuum for temperature sensitive products and atmospheric condition for normal drying.
Product Brochure
Product Brochure
Product Brochure
Product Brochure
Product Brochure
Product Brochure
Product Brochure
Product Brochure